When we talk about structure, we usually mean the frame, which is the structural and load-bearing part of the building. This includes beams, columns, slabs, joists, load-bearing walls, roofing, and many other elements that support the building’s loads. Each of them plays an important role in the stability and solidity of the structure. Mould is known to be a real danger for certain structural elements, especially those made of wood, such as beams and joists.
As time goes by, structures such as buildings undergo the effects of wear and tear. Exposed to too much moisture, these elements end up being damaged or rotting, threatening the house’s structural integrity. These effects can generally be seen in the foundation’s deterioration, the structure’s subsidence, or the formation of cracks in the walls. This type of damage can, at any time, worsen and endanger the building and its occupants. Fortunately, solutions are available to repair the damage.
Foundation reinforcement
The foundation is the base on which a structure rests. It must therefore be solid in order to support the weight of all the components that will form the building. But there comes a time when its solidity takes a blow of old and threatens to give way, thus putting in sursis all the construction. To remedy this situation, builders can proceed with the installation of micro piles.
This technique is carried out in three steps; first, the soil or concrete foundation is dug, then metal reinforcements are inserted before filling the hole with cement grout. This technique can also be applied to new constructions to ensure the good performance of a foundation, especially on unreliable soils.
Raising the structure
Subsidence is a phenomenon whereby a building gradually sinks into the ground. It is often caused by the poor condition of the ground on which the building is built. Different lifting techniques can be performed to bring the structure back to an optimal level.
Mechanical lifting
Mechanical lifting consists of installing mechanical jacks under the foundation. These jacks will then exert a force to lift the structure. This technique is mainly used on light structures.
Hydraulic lifting
It is more or less the same principle as mechanical lifting, except hydraulic jacks, are used here. The reason is that this type of jack is intended to lift more important loads.
Reinforcement of the slab
The poor quality of the soil can cause the instability of a floor. In order to reinforce the pavement, broaching can be performed. During this operation, the base walls and the slab are drilled. Then cement or other material is injected. This technique allows for reinforcing the ground and will help it to better support the weight of the construction.
The facade renovation
The effects of time on construction can be seen through the cracks in the walls. In addition to being aesthetically unpleasant to see, these cracks are a warning of the poor condition of the building. It is then important to plan renovation work before everything gets complicated. The facade restoration is necessary in this case. In addition to restoring the facades, this operation aims to strengthen the structure so that it can last as long as possible.
Getting a head start
Although reinstatement work exists and proves effective in most cases, it is possible to be prepared for the unexpected. That means taking precautions early in the construction process. For that, it is essential to study the land on which we will build. Then, the work done must respect the appropriate standards.
A building is a structure made to last, so it is in the interest of its owner to bet on an excellent provider to avoid making a bad investment. For that, there is nothing better than to call upon a construction company composed of equally competent technicians. Indeed, they will be able to find the perfect schemes to adapt the work to the type of land while taking care to respect the expectations of their client.
Sound off in the comments section below and tell us what you want to read next and if you want to read more about construction sites.
