How Can a Concrete Pump Benefit Your Construction Project

You have a construction project wondering what makes concrete pumping more practical

. Do other options include directly dumping from a ready-mix truck, bucketing with a

crane, or merely using a wheelbarrow?

Contractors report distinct advantages that can impact a project’s bottom line with

increased profits. The reasons are time and labor savings, improved scheduling, reduced

site preparation, on-site employee satisfaction, high-quality control, and the versatility

of placing the concrete quickly.

You can consider using a concrete pump in today’s construction site for the following reasons.

Pump your concrete for quick and easy placement

A concrete pump causes less congestion and places concrete faster than any other method.

With a simple remote control unit, the pump truck

operator can move the boom to place concrete at the selected place. The concrete is placed directly without any need for re-handling, which improves the concrete’s quality. You won’t need much

labor, wheelbarrows, and rakes to drag the concrete 7 feet from the discharge point of the

truck chute.

Are pumps reliable, or will they break down anytime?

A modern concrete pump in the hands of a professional concrete pumping operator is very

reliable, and the break-down factor is minor. For instance, a boom or line pump is

beneficial when placing concrete in a residential area. Even if the pump happens to break-

Most pumpers carry spare parts or can get a replacement pump quickly, even if

from a different company.

Avoid getting stuck on soft ground 

No one wants to pay $400 for a tow truck to pull out a concrete mixer trapped in muddy terrain. This kind of problem will never happen with a pump.

Less messy work

Usually, mixer trucks pick up a lot of mud and spread it all over the paved streets in the

subdivision and on adjacent highways. Here, a pump will avoid the stress

that can cause public relations issues.

Overcoming tall residential walls

Some houses have tall walls around the whole property, making it impossible to pour into a narrow wall higher than the truck chute. A concrete pump truck minimizes the mess

of concrete spilling over the sides of the walls.

Does a pump cost a lot?

A pump does carry its own cost, but you should look at the whole picture. You will be able

to decrease total construction time; you will save on job overhead, equipment rental costs,

and construction interest charges.

Are pumps safe?

A pump is safer than other methods when it is used properly. You won’t have three tons of

concrete spill-offs or tripping accidents are usually associated with buggies.

Do pumps perform well on high placements?

Modern pumps can perform on structures of any height. The tallest buildings built over the last decades were pumped more than 1,000 feet high. So, yes, pumps perform well on

high placements.

Can a pump provide no interruptions when pouring a bridge deck, for example?

The modern big concrete pumps are ideal for bridge decks. Fast concrete placement by the

pumps allows the bridge-finishing machine to go faster. The pump can move some parts of deteriorated concrete, which is often the case with other concrete placement methods. Also, pumping concrete speeds up unloading time, reducing the risk of exceeding

time limits that usually deteriorate the concrete, mainly in winter when concrete setting

time slows down. Pausing the placement of concrete for a moment is no more an issue. The extra

speed of a pump (up to 200 cubic yards per hour) allows the pump to catch up on time.

Hence, you can get the concrete back on the deck.

A crane is a lot cheaper than a concrete pump

A crane is cheaper per hour, but you will need spotters and at least two men to dump the bucket without forgetting signalmen. You will also need muckers to handle the concrete once it is dumped. All in all, you will need more labor for a longer time. You stand to gain on

a big pour with a pump, as the savings of overtime alone, will pay for the pump.

Concrete pumping offers efficiency, quality, and bottom-line benefits from residential foundations to the world’s tallest structures. For an efficient and cost-effective method of placing concrete in the construction industry today, you can contact a professional providing trailer pumps on the market. The benefit of reaching a pro is that you will get the assistance of a dedicated team committed to delivering top-notch services. For instance, they will be able to guide you choose between trailer concrete pumping, concrete line pumps, stationary pumps, Mayco LS 400 (the latest equipment), and more.

Hope this post is helpful to you. Remember to share your experience in the comments below.